VariPack V 165 XC Plus • V 190 XC Plus

VariPack rundballepresseren er en kraftig specialmaskine designet til tørre afgrøder. Rundballepresseren er udstyret med en 2,15 m bred W-formet EasyFlow pickup uden kulissestyring og med få bevægelige dele. Den sørger for en ren, ensartet og fuldstændig opsamling af afgrøden, selv under vanskelige forhold. VariPack er som standard udstyret med et snittesystem med 26 knive, men du kan også vælge at anvende færre eller ingen knive, da en knivgruppeindstilling på 0 eller 13 knive også er muligt. Det er muligt med disse 3 knivtilkoblingsmuligheder at opnå en knivlængde på 84 eller 42 mm. Dermed er snittesystemet udstyret til at klare alle arbejdsbetingelser. Rundballenpresseren har et pressekammer, der består af 4 endeløst omløbende fladremme, hvilket gør den til specialist i tørre afgrøder som hø, halm eller wraphalm.

Beskrivelse

 

VariPack V 165 XC Plus

Ekstra fakta om VariPack V 165 XC Plus:

  • Integralrotor for maksimal ydelse
  • XCut snittesystem med præcisionsknive for et præcis og glidende snit
  • Dobbelt drev-koncept for sikker ballestart og perfekt balleform
  • Ekstrem høj pressetæthed
  • Automatisk rengøring af remmene med to rengøringsvalser
  • Netslidske som standard, for komfortabel ilægning af netrulle
  • Automatisk yderstillingsdæmpet bagklap vis bagklapcylinder, for en hurtig aflægning af ballen
  • Fuldautomatisk centralsmøring til fedt og olie

Yderligere information

Balledimensioner (CM)

165

Knive

XC 26 Kniv

EasyFlow pick-up

  • Reliable and effective – 6 mm double tines arranged in a W-line and large-diameter Coils
  • A clean rake – 2.15 m pick-up for thorough and consistent rakes without losses
  • Durable and hard-wearing – few moving parts reduce wear to a Minimum

The EasyFlow pick-up pivots 70mm sideways and is renowned for persevering and diligent performance in the most difficult conditions and at high work rates. Thanks to its clutter-free build that relies on only very few moving parts, the unit stands out for minimum wear and maximum longevity.

KRONE had good reasons for opting against cam track controlled tines on the EasyFlow pick-up. Instead of using many moving parts that are prone to wear, EasyFlow has special strippers that ensure the tine angle is always right the length ideal. Measuring 6 mm in diameter and mounted with large coils, the tines are particularly vigorous and hard-wearing. The arrangement in a W-line also keeps the material from sliding towards the slope. The ideal distribution of the crop across the rotor also ensures clean cuts. Narrowly spaced at 55 mm, these tines allow EasyFlow to pick up even short and heavy crops without losses.

Integral rotor

  • Standard feature – the cutting system with 26 blades
  • Precision cut – the best quality from controlled cuts
  • So sharp – for superior cutting quality
  • So versatile – 0/ 13/ 13 or 26 blades in work

VariPack Plus integrates two feed rollers into either side of the rotor. This clever design leads to a substantial reduction of moving parts. The cutting system is a standard feature. It stands out for a simple and rugged design to give easy cleaning, service and maintenance and long service life. Apart from that, its controlled cuts lead to an optimum cutting quality.

VariPack Plus integrates two feed rollers into either side of the rotor. This clever design eliminates a second drive. In addition, the helical rotor combines with the W-arrangement of the pick-up tines to feed the material into every corner of the bale chamber – for firm edges and higher bale weights.

Integrating the feed rollers in the rotor leads to a very consistent and dependable feed of material from the pickup to the rotor – another boon for the overall crop flow and reliable machine performance.

The pick-up and the Integral Rotor are driven by a 1 1/4inch chain. The simple and robust drive uses only few moving parts and makes for easy servicing and reduced wear.

The double tines pull the material in a consistent flow through the blades, preventing any haulm to slip through and leading to higher bale weights, because cut material is baled to higher densities. The helix ensures there is no peak load in the cutting system for smooth operation and quiet running. At the same time, the W-line of tines on the pick-up supplies the material in a consistent flow to the cutting system for an optimum throughput and uniform bale fills.

Knive

Ballekammer

Net wrapper

Bagdør

Dæk og tilbehør

Kontakt os